Hello, the cabinet body can be quickly chamfered in the up-down, left-right, and front-back directions through directly modifying parameters or using the cabinet chamfering function, enabling the avoidance of beams and columns in multiple directions for one cabinet. Please follow the steps below: (Note: This function is applicable to all custom cabinets of version 4.0 and above)

1. Directly modify the chamfer size through parameters;

2. Operate through the cabinet chamfering function;

1. Take the system cabinet as an example, right-click the cabinet with the mouse, and right-click to enter the "Cabinet Chamfer" setting;

New design interface:

2. Left-click the corner point that needs to be chamfered with the mouse. Once selected, it will turn dark blue. Secondly, set the width and depth of the cabinet chamfer as needed. For example, set the cabinet width to 250 and the depth to 100; (Note: The figure comes with indications of the width and depth of the chamfer)

3. After setting the chamfer, you can set the "patch plate thickness" as needed. For example, set its thickness to 25. The patch plate method supports external and internal;

4. If you do not need this "cabinet chamfer", you can left-click "Delete Chamfer".

5. The operation steps for beam avoidance chamfer are the same. Select the points that need to be chamfered for editing (Through the cabinet chamfering function, you can set both column avoidance and beam avoidance for the cabinet at the same time).

Click Me to View the Detailed Tutorial