I. Problem-solving:

(1) For some merchants, the top and bottom plates of the corner-cut cabinets are processed at the installation site, and the plates do not need to be cut during the design. Currently, the process of canceling the top and bottom plates' participation in the cutting operation is rather cumbersome and inefficient.

        Now, you can directly check the plates to be cut in the corner-cut setting panel to improve the design efficiency.

(2) The default values of the corner-cut function do not match some merchants, and currently, custom settings are not available. Only modifications can be made after generation, increasing the operational burden on the designers.

II. Graphic and Text Operating Steps:

(1) Open the plan;

(2) Select the cabinet, right-click - Corner-cut - Cabinet Corner-cut;

(3) Set the corner-cut of the top and bottom plates. Check to participate in the corner-cut, and uncheck to not cut.

Process Value Settings:

(1) Open the 3D Parametric Backend - Resource Configuration - Default Material Configuration - Cabinet Corner-cut;

(2) Set the default values of the gap and the default value of the back plate insertion.