I. Function Introduction:

(1) When generating door panels and drawers, the depth position reference will be marked and it is supported to be modified

(2) Upgrade the function of generating the shortest side of the door panel: Add the door panel position setting. By default, the optimal depth is automatically matched, and the forced control mechanism of the permission code is removed; If it is set as "Long Board", the generated door panel is fixed with the longest board as the depth position reference. When the generated door panel interferes with the surrounding cabinet boards, the covering method will be automatically modified to be inset (To trigger this function, in the parametric background resource configuration - Door Panel Solution - Door Panel Shrinkage Setting, set the inset covering method type to not cover)

II. Problem-solving:

(1) When the depth of the surrounding boards of the generated door panel and drawer is inconsistent, the position result after generation cannot be visually seen directly. If the result is not as expected, it can only be deleted and regenerated

(2) The function of generating the shortest side of the door panel is strongly bound to the account permission. Triggering this function will forcibly change the door panel cover value to "-1", but the user is not informed, resulting in the generated door panel not being as expected and mistakenly thinking it is a software defect

III. Graphic and Text Operating Steps:

(1) Click Customization on the left - Select the Cabinet Module to enter, or open a design scheme containing cabinets

(2) Drag out the cabinet from the left material bar or select the cabinet in the scene

(3) Select the inner space to generate the door panel. The new door panel position setting is added on the right side of the generation door panel setting panel; The long board option is to fix the longest board as the position reference, and the automatic option automatically obtains the optimal depth according to the algorithm rules

(4) The blue line on the inner space mask layer of the generated door panel is the position reference after generation. Click the triangle on the other side to switch to other boards as the reference

IV. Dynamic Diagram Demonstration: